PCIE FPGA bridge

PCIe to simple IOBUS for Cyclone IV and Mini Pcie Fpga

  HOME >> PCIE FPGA bridge


PCIE Bridge on FPGA, mini and standard board form factorPCIe to General Pourpuse I/O Bus Bridge (PCIe target), Drivers, QSYS and Demo Sources
The GPIO-BUS interface provides a parallel bus with 32 bits data lines, 8 bit address bus lines, controls (RD#, WR#, CS0# , CS1#), auxiliary signals (WAIT#, INT#).

The bus cycle timing can be defined by a control register, setup, hold and pulse width can be changed by user allowing bus cycle time from 48ns to 768ns with 16ns steps. Additional delay can be added by WAIT# signal.

The system includes VHDL source, QSYS design, command line demo source and executable, fpga loadable files (both EP4CGX15BF14C7N and EP4CGX30BF14C6N fpga).


The loading of system on the FPGA needs an USB blaster, some PCIE board (mini PCIE and PCIE on cables) require also a MBBA adapter.


Read Pdf Button

Click here to open data sheet


Click here to view all documents list


141030-01A1 MS-Windows 32bits, XP and Seven version

141030-01A3 MS-Windows 64bits, Seven version

141030-01A4 Linux64 version




GEB Enterprise S.r.l. • VAT 10190271006
Via Rocca di Papa, 21 - 00179 Roma ITALY •
Ph. +39 06 7827464 - Fax: +39 06 7806894 • info@geb-enterprise.com

Copyright © 2009 GEB Enterprise S.r.l. All rights reserved.